manualshive.com logo in svg

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 141 / 521

Поделиться
Скачать
Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 141

 

Assigning Certificates

Altitude

TM

 4000 Series Access Point System Reference Guide

141

4

 

Define the following configuration parameters required for the Import of the trustpoint.

5

Select 

OK 

to import the defined trustpoint. Select 

Cancel

 to revert the screen to its last saved 

configuration.

6

To optionally import a CA certificate, select the 

Import CA 

button from the Certificate Management 

screen.

The CA signs all digital certificates it issues with its own private key. The corresponding public key 
is contained within the certificate and is called a CA certificate.

Trustpoint Name

Enter the 32 character maximum name assigned to the target trustpoint. The 
trustpoint signing the certificate can be a certificate authority, corporation or 
individual. 

Key Passphrase 

Define the key used by both the device and the server (or repository) of the 
target trustpoint. Select the Show textbox to expose the actual characters 
used in the key. Leaving the Show checkbox unselected displays the 
passphrase as a series of asterisks “*”.

URL 

Provide the complete URL to the location of the trustpoint.

Protocol

If selecting Advanced, define, the protocol used for importing the target 
trustpoint. Available options include:

•

tftp

•

ftp

•

sftp

•

http

•

cf

•

usb1

•

usb2

Port

If selecting Advanced, use the spinner control to set the port. This option is 
not valid for cf, usb1 and usb2.

IP Address

If selecting Advanced, enter IP address of the server used to import the 
trustpoint. This option is not valid for cf, usb1 and usb2.

Hostname

If selecting Advanced, provide the hostname of the server used to import the 
trustpoint. This option is not valid for cf, usb1 and usb2.

Path

If selecting Advanced, specify the path to the trustpoint. Enter the complete 
relative path to the file on the server.

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов