Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 189 | Manualshive

Страница: 189 / 521

Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 189

Adoption Overrides

Altitude

TM

4000 Series Access Point System Reference Guide

189

is on a different network, it forwards the packet to the segment. If the destination MAC is on the
same network segment, the packet is dropped (filtered).

9

Define or override the target

VLAN ID

if the destination MAC is on a different network segment.

10

Provide an

Interface Name

used as the target destination interface for the target MAC address.

11

Select

OK

to save the changes and overrides. Select

Reset

to revert to the last saved configuration.

Overriding a Bridge VLAN Configuration

“Overriding the Network Configuration”

A Virtual LAN (VLAN) is separately administrated virtual network within the same physical. VLANs
are broadcast domains to allow control of broadcast, multicast, unicast, and unknown unicast within a
Layer 2 device.

For example, say several computers are used into conference room X and some into conference Y. The
systems in conference room X can communicate with one another, but not with the systems in
conference room Y. The creation of a VLAN enables the systems in conference rooms X and Y to
communicate with one another even though they are on separate physical subnets. The systems in
conference rooms X and Y are managed by the same single entity, but ignore the systems that aren't
using same VLAN ID.

Administrators often need to route traffic to interoperate between different VLANs. Bridging VLANs
are only for non-routable traffic, like tagged VLAN frames destined to some other device which will
untag it. When a data frame is received on a port, the VLAN bridge determines the associated VLAN
based on the port of reception. Using forwarding database information, the Bridge VLAN forwards the
data frame on the appropriate port(s). VLAN's are useful to set separate networks to isolate some
computers from others, without actually having to have separate cabling and Ethernet switches.

To define a bridge VLAN configuration or override for a device profile:

1

Select

Devices

from the Configuration tab.

2

Select a target device from the Device Browser in the lower, left-hand, side of the UII.

3

Select

Profile Overrides

from the Device menu to expand it into sub menu options.

4

Select

Network

to expand its sub menu options.

5

Select

Bridge VLAN

.

NOTE

A blue override icon (to the left of a parameter) defines the parameter as having an override applied. To

remove an override, go to the Basic Configuration screen’s Device Overrides field and select Clear Overrides.
This will remove all overrides from the device.

«
...
187
188
189
190
191
...
»

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов