Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 192 | Manualshive

Страница: 192 / 521

Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 192

Chapter 6: Device Configuration

Altitude

TM

4000 Series Access Point System Reference Guide

192

NOTE

If creating a mesh connection between two access points in Standalone AP mode, Tunnel must be

selected as the Bridging Mode to successfully create the mesh link between the two access points.

11

Set or override the following

Layer 2 Firewall

parameters:

12

Select the

OK

button to save the changes and overrides to the General tab. Select

Reset

to revert to

the last saved configuration.

Overriding a Miscellaneous Network Configuration

“Overriding the Network Configuration”

An access point profile can be configured to include a hostname in a DHCP lease for a requesting
device and its profile. This helps an administrator track the leased DHCP IP address by hostname for a
device profile. When numerous DHCP leases are assigned, an administrator can better track the leases
when hostnames are used instead of devices.

To include a hostnames in DHCP request:

1

Select

Devices

from the Configuration tab.

2

Select a target device from the Device Browser in the lower, left-hand, side of the UI.

3

Select

Profile Overrides

from the Device menu to expand it into sub menu options.

4

Select

Network

to expand its sub menu options.

5

Select

Miscellaneous

.

NOTE

A blue override icon (to the left of a parameter) defines the parameter as having an override applied. To

remove an override, go to the Basic Configuration screen’s Device Overrides field and select Clear Overrides.
This will remove all overrides from the device.

Trust ARP Responses

Select the radio button to use trusted ARP packets to update the DHCP
Snoop Table to prevent IP spoof and arp-cache poisoning attacks. This
feature is disabled by default.

Trust DHCP Responses

Select the radio button to use DHCP packets from a DHCP server as
trusted and permissible within the network. DHCP packets are used to
update the DHCP Snoop Table to prevent IP spoof attacks. This feature is
disabled by default.

Edge VLAN Mode

Select the radio button to enable edge VLAN mode. When selected, the IP
address in the VLAN is not used for normal operations, as its now
designated to isolate devices and prevent connectivity. This feature is
enabled by default.

«
...
190
191
192
193
194
...
»

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов