manualshive.com logo in svg

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 442 / 521

Поделиться
Скачать
Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 442

 

Chapter 13: Statistics

Altitude

TM

 4000 Series Access Point System Reference Guide

442

This screen provides the following information:

Radio

Displays the name assigned to each listed RF Domain member access 
point radio. Each name displays as a link that can be selected to display 
radio information in greater detail.

Tx Bytes

Displays the total number of bytes transmitted by each RF Domain member 
access point radio. This includes all user data as well as any management 
overhead data. 

Rx Bytes

Displays the total number of bytes received by each RF Domain member 
access point radio. This includes all user data as well as any management 
overhead data. 

Tx Packets

Displays the total number of packets transmitted by each RF Domain 
member access point radio. This includes all user data as well as any 
management overhead packets. 

Rx Packets

Displays the total number of packets received by each RF Domain member 
access point radio. This includes all user data as well as any management 
overhead packets. 

Tx User Data Rate

Displays the rate (in kbps) that user data is transmitted by each RF Domain 
member access point radio. This rate only applies to user data and does 
not include any management overhead. 

Rx User Data Rate

Displays the rate (in kbps) that user data is received by each RF Domain 
member access point radio. This rate only applies to user data and does 
not include any management overhead. 

Tx Dropped

Displays the total number of transmitted packets which have been dropped 
by each RF Domain member access point radio. This includes all user data 
as well as any management overhead packets that were dropped. 

Rx Errors

Displays the total number of received packets which contained errors for 
each RF Domain member access point radio. 

Refresh

Select the 

Refresh 

button to update the statistics counters to their latest 

values.

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов