manualshive.com logo in svg

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 497 / 521

Поделиться
Скачать
Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 497

 

Access Point Statistics

Altitude

TM

 4000 Series Access Point System Reference Guide

497

The

 RSA Key Details

 field displays the size (in bits) of the desired key. If not specified, a default key 

size of 1024 is used. 

The 

RSA Public Key

 field lists the public key used for encrypting messages.

Periodically select the 

Refresh

 button to update the screen’s statistics counters to their latest values.

WIPS

“Access Point Statistics”

A 

Wireless Intrusion Prevention System

 (WIPS) monitors the radio spectrum for the presence of 

unauthorized access points and take measures to prevent an intrusion. Unauthorized attempts to access 
the WLAN is generally accompanied by anomalous behavior as intruding clients try to find network 
vulnerabilities. Basic forms of this behavior can be monitored and reported without a dedicated WIPS. 
When the parameters exceed a configurable threshold, a SNMP trap is generated that reports the results 
via management interfaces.

The WIPS screen provides details about the blacklisted clients (unauthorized access points) intruded 
into the network. The details include the name of the blacklisted client, the time when the client was 
blacklisted, the total time the client remained in the network, etc. The screen also provides WIPS event 
details.

WIPS Client Blacklist

“WIPS”

This 

Client Blacklist 

displays blacklisted clients detected by this access point using WIPS. Blacklisted 

clients are not allowed to associate to this access points.

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов