manualshive.com logo in svg

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 425 / 521

Поделиться
Скачать
Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 425

 

System Statistics

Altitude

TM

 4000 Series Access Point System Reference Guide

425

6

The 

Wireless Clients

 table displays the total number of wireless clients managed by the access points 

deployed within the system.

7

Refer to the 

Clients by Radio Type 

field to display a colored chart depicting the number of clients 

connected to system member access points. Each radio type (802.11a, 802.11an, 802.11b, 802.11bg and 
802.11bgn) displays a chart length proportional to its number of clients.

8

Periodically select

 Refresh 

to update the inventory to its latest device membership information.

Adopted Devices

“System Statistics”

The 

Adopted Devices

 screen displays a list of devices adopted to the access points in the system (both RF 

Domain and non RF Domain member access points).

To view adopted AP statistics:

1

Select the 

Statistics

 menu from the Web UI.

2

Select 

System

 from the left-hand navigation pane.

3

Select 

Adopted Devices 

from the System menu.

Top Client Count

Displays the number of wireless clients adopted by the access points 
deployed within the system.

RF Domain

Displays the name of the access point RF Domain the listed clients are 
connected to.

Last Update

Displays the UTC timestamp when the client count was last reported.

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов