manualshive.com logo in svg

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 249 / 521

Поделиться
Скачать
Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 249

 

WEP 128 Keyguard

Altitude

TM

 4000 Series Access Point System Reference Guide

249

4

Refer to the

 Advanced RADIUS Configuration

 field to set the WLAN’s NAS configuration and 

RADIUS Dynamic Authorization. 

5

Refer to the 

Radio Rates

 field to define selected data rates for both the 2.4 and 5.0 GHz bands.

NAS Identifier

Specify what should be included in the RADIUS NAS-Identifier field for 
authentication and accounting packets relating. Configuring a value here 
is optional, and defaults are used if this is not configured per WLAN.

NAS Port

The profile database on the RADIUS server consists of user profiles for 
each connected 

network access server

 (NAS) port. Each profile is 

matched to a username representing a physical port. When the access 
point authorizes users, it queries the user profile database using a 
username representative of the physical NAS port making the 
connection. Set the numeric port value between 0-4,294,967,295.

RADIUS Dynamic 
Authorization

Select the radio button to enable a mechanism that extends the RADIUS 
protocol to support unsolicited messages sent from the RADIUS server. 
These messages allow wireless network administrators to issue c

hange 

of authorization

 (CoA) messages, which affect session authorization, or 

Disconnect Message (DM)

, which cause a session terminate 

immediately. This feature is disabled by default.

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов