manualshive.com logo in svg

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 208 / 521

Поделиться
Скачать
Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 208

 

Chapter 6: Device Configuration

Altitude

TM

 4000 Series Access Point System Reference Guide

208

12

Use the parameters within the 

Automatic Adopted AP Firmware Upgrade

 field to define an automatic 

firmware upgrade from a controller based file.

13

Use the parameters within the 

Legacy Settings

 field to define how legacy devices manage firmware 

updates.

14

Select

 OK

 to save the changes and overrides made to the profile’s Management Firmware 

configuration. Select 

Reset

 to revert to the last saved configuration.

15

Select 

Heartbeat

 from the Management menu.

16

 

Select the 

Service Watchdog

 option to implement heartbeat messages to ensure other associated 

devices are up and running and capable of effectively interoperating. The Service Watchdog is 
enabled by default.

17

Select 

OK

 to save the changes and overrides made to the profile maintenance

 Heartbeat 

tab. Select 

Reset

 to revert to the last saved configuration.

Enable Controller 
Upgrade of AP Firmware

Select the access point model to upgrade to a newer firmware version 
using its associated Virtual Controller AP’s most recent firmware file for 
that model. This parameter is enabled by default.

Number of Concurrent 
Upgrades.

Use the spinner control to define the maximum number (1 - 20) of 
adopted APs that can receive a firmware upgrade at the same time. Keep 
in mind that during a firmware upgrade, the access point is offline and 
unable to perform its normal wireless client support function until the 
upgrade process is complete.

Legacy Auto Upgrade

Select the radio button to define whether a legacy model access point will 
connect to a legacy device and downgrade to be compatible with that 
lower firmware version. The default settings is enabled.

Enable Update Legacy 
Device Firmware

Select this box to update legacy device firmware.

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов