Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 162 | Manualshive

Страница: 162 / 521

Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 162

Chapter 6: Device Configuration

Altitude

TM

4000 Series Access Point System Reference Guide

162

7

Refer to the following to review port status and assess whether an override is warranted:

Name

Displays the physical port name reporting runtime data and statistics.
Supported ports vary depending the supported Altitude 4700 series, Altitude
4532, Altitude 4511, or Altitude 4521 access points.

Type

Displays the physical port type. Cooper is used on RJ45 Ethernet ports and
Optical materials are used on fiber optic gigabit Ethernet ports.

Description

Displays an administrator defined description for each listed access point
port.

Admin Status

A green checkmark defines the port as active and currently enabled with the
profile. A red “X” defines the port as currently disabled and not available for
use. The interface status can be modified with the port configuration as
required.

Mode

Displays the profile’s current switching mode as either Access or Trunk (as
defined within the Ethernet Port Basic Configuration screen). If Access is
selected, the listed port accepts packets only from the native VLAN. Frames
are forwarded out the port untagged with no 802.1Q header. All frames
received on the port are expected as untagged and mapped to the native
VLAN. If set to Trunk, the port allows packets from a list of VLANs added to
the trunk. A port configured as Trunk supports multiple 802.1Q tagged
VLANs and one Native VLAN which can be tagged or untagged.

«
...
160
161
162
163
164
...
»

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов