Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 315

Страница: 315 / 521

Wireless IPS (WIPS)

Altitude

4000 Series Access Point System Reference Guide

315

Select

Add

to create a new WIPS signature,

Edit

to modify the attributes of a selected WIPS signature

Delete

to remove obsolete signatures from the list of those available.

If adding a new WIPS signature, define a

Name

to distinguish it from others with similar

configurations. The name cannot exceed 64 characters.

Set the following network address information for a new or modified WIPS Signature:

Refer to

Thresholds

field to set the thresholds used as filtering criteria.

Destination MAC

Displays each destination MAC address of the packet examined for
matching purposes.

Frame Type to Match

Lists the frame types specified for matching with the WIPS signature.

Match on SSID

Lists each SSID used for matching purposes.

Enable Signature

Select the radio button to enable the WIPS signature for use with the
profile. The default signature is enabled.

BSSID MAC

Define a BSS ID MAC address used for matching purposes.

Source MAC

Define a source MAC address for the packet examined for matching
purposes.

Destination MAC

Set a destination MAC address for a packet examined for matching
purposes.

Frame Type to Match

Use the drop-down menu to select a frame type for matching with the
WIPS signature.

Match on SSID

Sets the SSID used for matching. Ensure it’s specified properly or the
SSID won’t be properly filtered.

SSID Length

Set the character length of the SSID used for matching purposes. The
maximum length is 32 characters.

Client Threshold

Specify the threshold limit per client that, when exceeded, signals the
event. The configurable range is from 1 - 65,535.

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Результаты поиска

Содержание Altitude 4000 Series

Отзывы:

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 315 / 521

Результаты поиска

Содержание Altitude 4000 Series

Отзывы: