Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 167 | Manualshive

Страница: 167 / 521

Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 167

Adoption Overrides

Altitude

TM

4000 Series Access Point System Reference Guide

167

NOTE

A blue override icon (to the left of a parameter) defines the parameter as having an override applied. To

remove an override, go to the Basic Configuration screen’s Device Overrides field and select Clear Overrides.
This will remove all overrides from the device.

7

Review the following parameters unique to each Virtual Interface configuration to determine

whether a parameter override is warranted:

Once the configurations of existing Virtual Interfaces have been reviewed, determine whether a new
interface requires creation, or an existing Virtual Interface requires edit (override) or deletion.

8

Select

Add

to define a new Virtual Interface configuration,

Edit

to modify or override the

configuration of an existing Virtual Interface or

Delete

to permanently remove a selected Virtual

Interface.

Name

Displays the name of each listed Virtual Interface assigned when it was
created. The name is between 1 - 4094, and cannot be modified as part of a
Virtual Interface edit.

Type

Displays the type of Virtual Interface for each listed interface.

Description

Displays the description defined for the Virtual Interface when it was either
initially created or edited.

Admin Status

A green checkmark defines the listed Virtual Interface configuration as active
and enabled with its supported profile. A red “X” defines the Virtual Interface
as currently disabled. The interface status can be modified when a new
Virtual Interface is created or an existing one modified.

VLAN

Displays the numerical VLAN ID associated with each listed interface.

IP Address

Defines whether DHCP was used to obtain the primary IP address used by
the Virtual Interface configuration.

«
...
165
166
167
168
169
...
»

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов