Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 459

Страница: 459 / 521

Access Point Statistics

Altitude

4000 Series Access Point System Reference Guide

459

AP Adoption History

“Adoption”

To view historical statistics for adopted access points:

Select the

Statistics

menu from the Web UI.

Select

System

from the navigation pane (on the left-hand side of the screen), expand the default node

and select an access point for statistical observation.

Expand the

Adoption

menu item.

Select

Adopted AP History

The

Adopted Devices

screen describes the following historical data for adopted access points:

Pending Adoptions

“Adoption”

Adopted By

Lists the adopting access point.

Adoption time

Displays each listed access point’s time of adoption by this access point
(whose MAC address displays in the banner of the screen).

Uptime

Displays each listed access point’s in service time since last offline.

Refresh

Select the

Refresh

button to update the screen’s statistics counters to their

latest values.

Event Name

Displays the adoption event status of each listed access point as either
adopted or un-adopted.

AP MAC Address

Displays the MAC address of each access point this access point has
attempted to adopt.

Reason

Displays the reason code for each event listed in the adoption history table.

Event Time

Displays day, date and time for each access point adoption attempt.

Refresh

Select the

Refresh

button to update the screen’s statistics counters to their

latest values.

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Результаты поиска

Содержание Altitude 4000 Series

Отзывы:

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 459 / 521

Результаты поиска

Содержание Altitude 4000 Series

Отзывы: