manualshive.com logo in svg

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 214 / 521

Поделиться
Скачать
Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 214

 

Chapter 6: Device Configuration

Altitude

TM

 4000 Series Access Point System Reference Guide

214

18

 

Set a 

NAS-Identifier Attribute 

up to 253 characters in length. This is the RADIUS NAS-Identifier 

attribute that typically identifies where a RADIUS message originates

19

Set a 

NAS-Port-Id Attribute

 up to 253 characters in length. This is the RADIUS NAS port ID attribute 

which identifies the device port where a RADIUS message originates

20

Refer to the 

Turn off LEDs

 option to disable an adopted access point’s LEDs. This feature is enabled 

by default.

21

Select the 

Capable 

radio button within the RF Domain Manager field to designate this access point as 

capable of being the RF Domain manager for other access points within the RF Domain. This setting 
is enabled by default. The RF Domain Manager can support up to 24 access points of the same 
model. Altitude 4700 series or Altitude 4532 RF Domain Managers can support up to 512 client 
connections. An Altitude 4511 or Altitude 4521 RF Domain Manager can support up to 256 client 
connections.

22

Select the 

Priority

 radio button within the RF Domain Manager field to set this access point’s priority 

(1 - 255) versus other capable access points. The higher the value set the greater the likelihood of the 
access point being elected the RF Domain manager during the election process.

23

Select 

OK 

to save the changes made to the profile’s Advanced Miscellaneous configuration. Select 

Reset

 to revert to the last saved configuration.

Critical Resources

Access point critical resources are a list of device IP addresses on the network (gateways, routers etc.). 
The support of these defined IP address is interopreted as critical to the health of the access point 
managed network. These device addresses are pinged regularly by the access point. If there’s a 
connectivity issue, an event is generated stating a critical resource is unavailable. By default, there’s no 
enabled critical resource policy and one needs to be created and implemented. 

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов