Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 206 / 521

Chapter 6: Device Configuration
Altitude
TM
4000 Series Access Point System Reference Guide
206
5 Refer to the Message Logging field to define how the profile logs system events. It’s important to log
individual events to discern an overall pattern that may be negatively impacting performance.
6 Refer to the System Event Messages field to define or override how system messages are logged and
forwarded on behalf of the profile.
Select the Enable System Event s radio button to allow the profile to capture system events and append
them to a log file. It’s important to log individual events to discern an overall pattern that may be
negatively impacting performance. This settings is enabled by default.
Select the Enable System Event Forwarding radio button to enable the forwarding of system events.
This setting is enabled by default.
7 Refer to the Events E-mail Notification field to define or override how system event notification e-
mails are sent.
Enable Message Logging Select the radio button to enable the profile to log system events to a
user defined log file or a syslog server. Selecting this radio button
enables the rest of the parameters required to define the profile’s logging
configuration. This option is disabled by default.
Remote Logging Host Use this table to define numerical (non DNS) IP addresses for up to three
external resources where logged system events can be sent on behalf of
the profile. Select Clear as needed to remove an IP address.
Facility to Send Log
Messages Use the drop-down menu to specify the local server facility (if used) for
the profile event log transfer.
Syslog Logging Level Event severity coincides with the syslog logging level defined for the
profile. Assign a numeric identifier to log events based on criticality.
Severity levels include 0 - Emergency, 1 - Alert, 2 - Critical, 3 - Errors,
4 - Warning, 5 - Notice, 6 - Info and 7 - Debug. The default logging level
is 4.
Console Logging Level Event severity coincides with the console logging level defined for the
profile. Assign a numeric identifier to log events based on criticality.
Severity levels include 0 - Emergency, 1 - Alert, 2 - Critical, 3 - Errors,
4 - Warning, 5 - Notice, 6 - Info and 7 - Debug. The default logging level
is 4.
Buffered Logging Level Event severity coincides with the buffered logging level defined for the
profile. Assign a numeric identifier to log events based on criticality.
Severity levels include 0 - Emergency, 1 - Alert, 2 - Critical, 3 - Errors,
4 - Warning, 5 - Notice, 6 - Info and 7 - Debug. The default logging level
is 4.
Time to Aggregate
Repeated Messages Define the increment (or interval) system events are logged on behalf of
this profile. The shorter the interval, the sooner the event is logged. Either
define an interval in Seconds (0 - 60) or Minutes (0 -1). The default value
is 0 seconds.
Forward Logs to
Controller Select the checkbox to define a log level for forwarding event logs to the
control. Log levels include Emergency, Alert, Critical, Error, Warning,
Notice, Info and Debug. The default logging level is Error.
SMTP Server Specify either the Hostname or IP Address of the outgoing SMTP server
where notification e-mails are originated.
Port of SMTP If a non-standard SMTP port is used on the outgoing SMTP server check
this box and specify a port between 1 and 65,535 for the outgoing SMTP
server to use.
Sender E-mail Address Specify the e-mail address that notification e-mails will be sent from. This
will be the from address on notification e-mails.
Recipient’s E-mail
Address Specify the e-mail address(es) of recipients for email notifications.