EXFO Power Blazer 88000 Series, Руководство пользователя

Страница: 587 / 803

Test Functions
Power Blazer
575
Packet Capture

Triggered Frame - Details gives details on the triggered frame.
The triggered frame corresponds to the first received frame that
matches the filter and the trigger settings.
Frame Number
indicates the triggered frame position in the buffer.
The framing MAC/IP/UDP/TCP source and destination addresses are
displayed in a table.

Capture button allows starting/stopping the data capture. The test
must be running (refer to
Start/Stop|TX Button
on page 657) in order to
start capturing and recording data into the buffer. The Capture button is
not available when the trigger on field match is selected while its
trigger parameters are not valid.
No data will be recorded in the buffer if no frame matches the filter and
the trigger criteria during the data capture.
The data capture stops automatically once the buffer is full. The
maximum buffer capacity is 64 KBytes or a maximum of 2078 frames
for rates up to 10GE and 512 KBytes or a maximum of 8192 frames for
rates 40GE and 100GE.
When the capture stops or is manually stopped, the following message
is displayed:
Capture completed. Press Export to save captured
data (the test must be stopped)
. To avoid losing the captured data,
the data must be exported and saved into a file before restarting the
test or creating a new test.

Export button, available when the test application is stopped, allows
exporting the data captured into a .pcap file format and viewing the file
using Wireshark.

Save In
: Allows selecting the folder to save the capture file.
The capture file is saved in the following folder by default:
Users\<User>\Documents\88000-PowerBlazer\CaptureData