ETC Emphasis Lighting Control System, Руководство пользователя

Страница: 204 / 292

194 Emphasis Console v1.4.0 User Manual
Create a time code program using direct entry:
Step 1: Press [Setup] [7] [Enter] to view the Time Code Events display. The display
defaults to event #1.
Step 2: Press <S7 - More Softkeys> to access the editing softkeys.
Step 3: Press [Enter] to select event #1, or press [S1 - Select Event] [ x ] [Enter] to
choose another event number [x]. You are moved to the Time column.
N o t e :
The Time column displays the frames-per-second (fps) setting for the system.
Step 4: Using the Facepanel numeric keypad, enter the time for the event in
hours:minutes:seconds:frames. You do not have to enter leading zeros. For
example, to enter a time of 00:03:45:00, press [3] [4] [5] [0] [0] . The keypad
corner displays your entry as you type. Make sure the correct time is displayed
in the keypad corner before pressing [Enter] . When you press [Enter] , you are
moved to the A/B fader pair column.
Step 5: If required, type the cue number to be played in the A/B fader pair and press
[Enter] . You are moved to the fader Rate column.
Step 6: If required, type the rate value to be applied to the A/B fader pair for that cue and
press [Enter] . You are moved to the C/D fader pair column.
Step 7: If required, type the cue number to be played in the C/D fader pair and press
[Enter] . You are moved to the fader Rate column.
Step 8: If required, type the rate value to be applied to the C/D fader pair for that cue and
press [Enter] . You are moved to the submaster Bump column.
Step 9: If required, type the number of the submaster bump, and [+] to set the sub bump
on, or [-] to set the sub bump off and press [Enter] . You are moved to the
submaster Rate column.
Step 10: If required, type the rate value to be applied to the submaster and press [Enter] .
You are moved to the Macro column.
Step 11: If required, type the number of the macro to execute and press [Enter] . You are
moved to the Label column.