ETC Emphasis Lighting Control System, Руководство пользователя

Страница: 188 / 292

178 Emphasis Console v1.4.0 User Manual
DMX Output
DMX output from your Facepanel is treated the same as DMX output ports on a DMX Node.
The DMX output ports on your Facepanel can be configured locally.
To change the EDMX assignments of the DMX output ports:
Step 1: Power up or reboot the Facepanel.
Step 2: When the prompt appears at startup, press [1][2][3] to enter the configuration
menu.
Step 3: Using the down-arrow [
v
] key, scroll to DMX and press [Enter].
Step 4: Using the up- or down-arrow [
u
][
v
] keys, scroll to “DMX Output Port Timing” and
press [Enter] .
Step 5: Using the up- or down-arrow [
u
][
v
] keys, scroll to the new timing and press
[Enter] . The default setting is “MAX”.
Step 6: Using the down-arrow [
v
] key, scroll to “DMX Input Port n Start Channel” and
press [Enter] . The value of n is the port you want to adjust.
Step 7: Using the Facepanel numeric keypad, type the new EDMX starting address and
press [Enter] .
Step 8:
Using the down-arrow [
v
]
key, scroll to “DMX Input Port
n Channel Count” and
press [Enter] . The value of n is the port you want to adjust.
Step 9:
Enter the new channel count. The default value is “512”.
Step 10: Press
[Enter] .
Step 11: Repeat steps 6-10 for each port you want to adjust.
N o t e :
If you make an error while changing any of these settings, and you want to return to the
previously stored values, do not press [S8] . Simply turn the Facepanel power off and on
again. The previous settings will be restored.
Step 12: Press
[S8] to save your settings and exit the DMX configuration screen.
Step 13: Press
[S8] to save your settings and exit the main configuration screen.