ETC Emphasis Lighting Control System, Руководство пользователя

Страница: 75 / 292

3
System Settings 65
N o t e :
You can copy another profile to the desired destination and edit from that if you wish.
Select the profile you want to copy, then press [S6 - Copy to Profile] [x] [Enter] , where
[x] is the destination profile’s number.
Step 3: Use the following methods to edit the profile:
•
Press [S2 - Percent] [x] [At] [y] [Enter] where [ x ] is the percentage of fade
completion and [ y ] is the desired output percentage. You can also use the
up/down arrows to set the level and the left/right arrows to select
percentages.
• Press [S2 - Percent] [x] [S4 - Clear to End] to set all percentages above the
selected one to undefined output.
• Press [S5 - Fill Between] [Enter] to have Emphasis calculate output levels
for undefined completion percentages. Emphasis will calculate an even
transition between set output levels for any undefined levels within the
profile. You must have some set levels within the profile before you press
[S5] for this to have any effect.
• Press [S7 - Reset Profile] to return the profile to its default settings.
• You can label your profile (up to 16 characters). The name will appear in the
upper-left corner of the profile display and on the profile printed report. Press
[Label] or <S7 - More Softkeys> [S2 - Label] , type in the label on the
alphanumeric keyboard, and press [Enter] .
Step 4: Repeat step 4 until all adjustments have been made.