ETC Emphasis Lighting Control System, Руководство пользователя

Страница: 131 / 292

5
Blind Editing 121
Create a subroutine on a submaster:
Step 1: Press [Blind]. The Blind display defaults to cues.
Step 2: Press [Sub] [ x ] , where [x] is the submaster you want to use.
Step 3: Press [Type] [4] [Enter] to set the type to Subroutine.
Step 4: Press [1] to set Step 1
.
Step 5: Press right-arrow
[
t
]
key to move to the step contents column.
Step 6: Press [ y ] , where [y] is a recorded cue number, to set the cue number referenced
in step 1.
Step 7: Press right-arrow
[
t
]
key to move to the fade type column.
Step 8: Press:
•
[1] to set a Crossfade fade type. This setting overrides the fade type
recorded with the referenced cue.
• [2] to set an Allfade fade type. This setting overrides the fade type recorded
with the referenced cue.
• [3] to set a Blocking fade type. This setting overrides the fade type recorded
with the referenced cue.
• Press [Clear] to set a dynamic fade type. The dynamic fade type, displayed
in purple, follows the fade type stored with the cue.
Step 9: Press right-arrow
[
t
]
key to set the Upfade time. This can be fixed, dynamic or
manual. Type a time value or press [Clear] to set dynamic or manual fade time.
The dynamic fade time, displayed in purple, follows the fade time stored with the
cue.
Step 10: Press right-arrow
[
t
]
key to set the Downfade time. This can be fixed, dynamic
or manual. Type a time value or press [Clear] to set dynamic or manual fade
Dynamic settings
displayed in purple.