ETC Emphasis Lighting Control System, Руководство пользователя

Страница: 87 / 292

4
Live Editing 77
Captured channels and [Release]
When you set channels to levels and then move on to select other channels, the channels
you have just set are displayed in red and become captured . Captured channels have been
set to levels using manual control, and they may have been recorded into a cue, group,
focus point or submaster. Captured channels remain at their set level until you release
them.
Channels with certain attribute settings (see Channel Attributes, page 54 ) respond to the
[Release] command differently.
• Selected dependent channels are released with the first press of [Release] . Selected
independent channels are released with the second press of [Release] .
• Unselected (captured) dependent channels are released with the first press of
[Release] if there are no selected channels. Unselected (captured) independent
channels are released with the second press of [Release] .
• If you had dependent and independent channels captured, and some of those channels
selected, it’s possible for you to have to press
[Release] up to four times to release all
captured channels.
• First press releases selected dependent channels.
• Second press releases selected independent channels.
• Third press releases unselected (captured) dependent channels.
• Fourth press releases unselected (captured) independent channels.
Captured channels in red
Captured
channel
indicator
Selected
channels on the
wheel/trackpad