ETC Emphasis Lighting Control System, Руководство пользователя

Страница: 106 / 292

96 Emphasis Console v1.4.0 User Manual
Record effect submasters in Stage:
Step 1: Press [Stage] .
Step 2: Select channels using the procedure described in Select Channels, Dimmers
and Fixtures, page 72 . You can select individual channels, fixtures, groups or
focus points.
Step 3: Set levels using the procedure described in Set Levels, page 75 and Moving
Light Control, page 80 . If a channel references a focus point for its level, the level
will update when the focus point is changed.
Step 4: Press [Record] [Sub] [ x ] [Type] [3] [Enter] to set submaster [ x ] to the effect
type and record the first step. The attribute bar will indicate that the submaster is
now an effect.
Step 5: Select channels and set levels for the next step you want to record.
Step 6: Press [Record] [Sub] [ x ] [Enter] . Active channels will be recorded to the next
step of the effect.
Step 7: Repeat steps 5-6, making sure that only the channels you want to include in a
step are active.
N o t e :
If you want to record steps out of order, press [Record] [Sub] [x] <S7 - More Softkeys>
[S8 - Step] [y] [Enter] to select the step you want to record.
Using [Load Sub]
You can load a cue, group or focus point into a submaster using the [Load Sub] command.
[Load Sub] records the contents of the cue, group or submaster into the target submaster
with a few keystrokes. Cues loaded into submasters will maintain any focus point
references recorded in them. Focus points will load as if they are groups, losing the
reference to the focus point itself. [Load Sub] does not affect submaster timing.
Record a submaster using [Load Sub]:
Step 1: Press [Load Sub] [ x ] to select submaster [x], or [Load Sub] [ a ] [Thru] [ c ] to
select a range of submasters..
Step 2: Press:
•
[Cue] [ y ] [Enter] to load cue [y].
• [Group] [ y ] [Enter] to load group [y].
• [Focus Point] [ y ] [Enter] to load focus point [y].
• Load a range of cues, groups or focus points by selecting a range equal to
the number of submasters selected in step 1 and pressing [Enter] .
N o t e :
Load Sub is found on <S7 - More Softkeys> [S2 - Load Sub] in Stage on Express
facepanels.