ETC Emphasis Lighting Control System, Руководство пользователя

Страница: 93 / 292

4
Live Editing 83
You can use [Only] and [S3 - Solo] to limit the channels you record into a focus point. This
is helpful if you want to create focus points for one attribute category, like position, without
having to clear out all other channels.
Record a focus point using [Only] and [S3 - Solo]:
Step 1: Press [S8 - Fixture] [ x ] , where [x] is the fixture number you want to select. Use
[And] , [Thru] and [Except] to select multiple fixtures. The fixture box will be
displayed.
Step 2: Press [Only] [S1 - Position] to select the position channels of the fixture. You
can substitute [S2 - Image] , [S3 - Color] , [S4 - Beam] or [S5 - Other] to select
channels assigned to those categories. If you press [Only] [S6 - Attribute] [ y ] ,
where [y] is an attribute number, you can limit your selection to one attribute.
Step 3: Set levels using the procedure described in Moving Light Control, page 80 .
Step 4: Press [Record] [Focus Point] [ y ] [S3 - Solo] to record focus point [y] with levels
for the selected attribute(s) only.
Sneak
With the sneak function, you can manually set direct levels over time. When you use the
[At] , [Full] , [Level] and [Release] keys, the new level takes affect immediately. When you
use the level wheel or trackpad, you may not fade to the new level evenly. If you need to
change channel levels, and you want the change to be smooth or go unnoticed (like in a
performance situation), you can use the sneak function to have channels assume new
levels (or restore to recorded levels) over a given period of time. You can use the default
sneak time, set in Default Sneak Time, page 49 , or you can set the sneak time yourself.
N o t e :
You cannot sneak to a focus point, only to direct levels.
Set channel level using [S6 - Sneak]:
Step 1: Press <Stage> . The sneak softkey is only available in the Stage display.
Step 2: Press [S6 - Sneak] . This activates the sneak mode.
Step 3: Select the channels you want to sneak using the procedure described in Select
Channels, Dimmers and Fixtures, page 72 . You do not need to press [Channel] .
Step 4: Choose one of the following options:
•
Press [Enter] to sneak the channels out, or to recorded levels, in the default
Sneak time.
• Press [Time] [ y ] [Enter] to sneak the channels out, or to recorded levels, in
the time [ y ].
• Press [At] [ x ] [Enter] , to sneak to level [ x ] in the default Sneak time.
• Press [At] [ x ] [Time] [ y ] [Enter] to sneak to level [ x ] in the time [ y ].
N o t e :
To sneak all captured channels out or to their recorded levels in the default sneak time,
press [S6 - Sneak] [Enter] .