ETC Emphasis Lighting Control System, Руководство пользователя

Страница: 97 / 292

4
Live Editing 87
Park Fixtures
If you need to park a moving light, you can park whole fixtures one at a time or in ranges.
You can park them with direct levels or with reference to a focus point. You can only park
fixtures from the Stage display, and when you park a fixture, all associated channels are
parked whether you select them to set levels or not.
Park fixtures:
Step 1: Press [Stage] .
Step 2: Select fixtures using the procedure described in Select Channels, Dimmers and
Fixtures, page 72 .
Step 3: Set levels for the fixture(s) as described in Moving Light Control, page 80 .
Step 4: Press <S7 - More Softkeys> [S6 - Park] [Enter] . The selected fixture(s)
channels will be parked at their direct level, or at the level generated by a
referenced focus point, or at zero if they were without a set level when parked.
Unpark
When you unpark channels and dimmers, they are released to the highest control input
level or are sent to zero output.
Unpark channels:
Step 1: In the Stage display, press <S7 - More Softkeys> [S6 - Park] . In the Park
display, you do not need to press a softkey before selecting channels.
Step 2: Select channels using the procedure described in Select Channels, Dimmers
and Fixtures, page 72 . You can also select channels to unpark by [Group] ,
[Cue] , [Sub] and [Focus Point] .
Step 3: Press [Release] to unpark the channel(s).
N o t e :
To unpark all channels from Stage, press [S6 - Park] [Release] [Enter] . To unpark all
channels in the Park display, press [Release] [Enter] .
Unpark dimmers:
Step 1: In the Stage display, press <S7 - More Softkeys> [S6 - Park] . In the Park
display, you do not need to press a softkey before selecting dimmers.
Step 2: Select dimmers using the procedure described in Select Channels, Dimmers and
Fixtures, page 72 .
Step 3: Press [Release] to unpark the dimmer(s).
N o t e :
To unpark all dimmers from Stage, press [S6 - Park] [Dim] [Release] [Enter] . To unpark
all dimmers in the Park display, press [Dim] [Release] [Enter] .