ETC Emphasis Lighting Control System, Руководство пользователя

Страница: 90 / 292

80 Emphasis Console v1.4.0 User Manual
Moving Light Control
Moving lights require multiple control channels to control all their attributes. Collectively,
these channels are called a fixture . Fixtures are patched in Emphasis Visualization using
personalities that automatically match up their control channels to attributes and categories
in Emphasis Console. There are tools for controlling fixtures directly from Emphasis
Visualization. See the Emphasis Visualization User Manual for more information on
selecting fixtures and setting levels within Visualization.
There are also features for controlling fixtures directly from the Facepanel. Expression and
Insight facepanels have encoders for easily controlling the attributes of fixtures. See
Moving Light Functions, page 56 for information on setting up fixture attributes and
encoders.
N o t e :
You can access fixture attributes using the trackpad and arrow keys on Express
facepanels. On Expression/Insight 2x facepanels without the MLM, use the arrow keys
and the level wheel.
When you have fixtures patched in your show, they will appear in the console displays as
channels surrounded by a gray bar. As you select fixtures, their available attributes and
encoder assignments are displayed in the fixture box . You can set levels for channels within
a fixture by direct selection as well.
Control fixtures using the encoders (Expression/Insight 3 or 2x with MLM):
Step 1: Press [S8 - Fixture] [ x ] , where [x] is the fixture number you want to select. Use
[And] , [Thru] and [Except] to select multiple fixtures. The fixture box will be
displayed.
Step 2: Press [Focus Point] [Enter] to prepare the fixture for control.
Step 3: Press the page keys to move from one encoder page to the next.
Step 4: Spin the encoder corresponding to the attribute you want to change. Attributes
assigned to TX and TY are controlled by a serial trackball or other pointing device
connected to the Facepanel or MLM.
Step 5: Repeat steps 2 and 3 until you have completed all the changes you want to
make.
Fixture
channels
Fixture Box
Encoder assignment Current page
Fixture attribute
16 Bit data