ETC Emphasis Lighting Control System, Руководство пользователя

Страница: 103 / 292

4
Live Editing 93
Using Cues as Groups
Recorded cues can be used for channel selection and level setting just like groups. When
you use the [Group] [Cue] command, all the channels recorded in that cue are selected,
and their recorded levels can be recalled proportionally. You can also use [Group] [Cue]
with [Only] to selectively recall levels for selected channels or fixtures from recorded cues.
N o t e :
Cues containing an effect or subroutine cannot be used as groups.
Use a cue as a group:
Step 1: Press [Group] [Cue] [ x ] , where [ x ] is the cue number you would like to use as a
group. This will select all the channels recorded in that cue.
Step 2: Press [At] [ y ] , where [ y ] is the proportional level, or use the level wheel/trackpad.
Use [Full] to recall the recorded levels in the cue.
Use [Group] [Cue] with [Only]:
Step 1: Select channels using the procedure described in Select Channels, Dimmers
and Fixtures, page 72 .
Step 2: Press [Only] [Group] [Cue] [ x ] , where [x] is the recorded cue containing the
levels you want to recall.
Step 3: Press [Full] to recall the levels as recorded in cue [x]. Use the level wheel,
trackpad, or [At] to recall proportional levels.