ETC Emphasis Lighting Control System, Руководство пользователя

Страница: 138 / 292

128 Emphasis Console v1.4.0 User Manual
Submasters
Blind allows you to edit submasters without affecting the stage output. This is useful when
you are in the middle of a rehearsal or performance and you need to make a change. Blind
also allows you to see more detailed information about submasters that contain effects,
subroutines, or are set as Supermasters.
Edit submasters in Blind:
Step 1: Press [Blind] . The Blind display defaults to cues.
Step 2: If required, press [Page] [ x ] [Enter] to select the submaster page you want to
view. There are ten pages available.
Step 3: Press [Sub] [ y ] [Enter] to select submaster [y]. You can also use the [+] and
[-] keys to increment and decrement through the submasters on the current
submaster page.
Step 4: Select channels using the procedure described in Select Channels, Dimmers
and Fixtures, page 72 .
Step 5: Set levels using the procedure described in Set Levels, page 75 and Moving
Light Control, page 80 . “Not Recorded” will blink in the lower left corner of the
channel area.
Step 6: Press [Record] <Sub> < y > [Enter] , where [y] is the target submaster number.
N o t e :
When you edit cues, submasters, groups or focus points in Stage, Fader or Blind,
changes to channel levels or effects are not recorded until you press [Record] [Enter] .
Changes to overall cue or submaster timing do not require [Record] [Enter] .
Submaster List
In the Submaster List display, you can view and edit the submaster numbers and their
attributes. You can edit one or a number of submasters at a time, using the arrow keys to
navigate within the list. You can only view and edit one page of submasters at a time. To
view and edit submasters on other pages, press [Page] [ x ] [Enter] , where [x] is the page
number. The current level of each submaster’s fader is displayed in the “%” column.