ETC Emphasis Lighting Control System, Руководство пользователя

Страница: 107 / 292

4
Live Editing 97
Using Submasters as Groups
Recorded pile-on submasters can be used for channel selection and level setting just like
groups. When you use the [Group] [Sub] command, all the channels recorded in that
submaster are selected, and their recorded levels can be recalled proportionally. You can
also use [Group] [Sub] with [Only] to selectively recall levels for selected channels or
fixtures from recorded submasters.
Use a submaster as a group:
Step 1: Press [Group] [Sub] [ x ] , where [ x ] is the submaster number you would like to
use as a group. This will select all the channels recorded in that submaster.
Step 2: Press [At] [ y ] , where [ y ] is the proportional level, or use the level wheel/trackpad.
Use [Full] to recall the recorded levels in the submaster.
Use [Group] [Sub] with [Only]:
Step 1: Select channels using the procedure described in Select Channels, Dimmers
and Fixtures, page 72 .
Step 2: Press [Only] [Group] [Sub] [ x ] , where [x] is the recorded submaster containing
the levels you want to recall.
Step 3: Press [Full] to recall the levels as recorded in submaster [x]. Use the level wheel,
trackpad, or [At] to recall proportional levels.
N o t e :
Effect, Subroutine and Supermaster submasters cannot be used as groups.