ETC Emphasis Lighting Control System, Руководство пользователя

Страница: 60 / 292

50 Emphasis Console v1.4.0 User Manual
Master Type
The Grandmaster fader can be set to one of three options:
• Disabled . . . . . . . . . . Master fader has no effect.
• Grandmaster . . . . . . The default setting, the master fader controls all levels on stage
except parked and independent channels.
• Sub Grandmaster . . Master fader controls all levels on stage generated by
submasters.
Set the Master type:
Step 1: On your Emphasis Facepanel or from the virtual facepanel in Emphasis
Visualization, press [Setup] [1] [Enter] to display the Systems Settings menu.
Step 2: Press [1][0] [Enter] to choose Master Type.
Step 3: Press [0] [Enter] to disable the Grandmaster, or [1] [Enter] for Grandmaster, or
[2] [Enter] for Sub Grandmaster.
Set Channels/Submasters 1-to-1
You can set any or all pages of submasters to automatically record a one-to-one
relationship with your channels. This means you can automatically record channel 1 to
submaster 1, channel 2 to submaster 2, and so on. Each channel records at full, allowing
you to emulate channel faders on consoles without that ability.
Set channels/submasters 1-to-1:
Step 1: On your Emphasis Facepanel or from the virtual facepanel in Emphasis
Visualization, press [Setup] [1] [Enter] to display the Systems Settings menu.
Step 2: Press [1][1] [Enter] to choose Set Channels/Submasters 1-to-1.
Step 3: Press [0] [Enter] to set all submaster pages 1-to-1 (for 240 channels on Express
and Expression, 1080 channels for Insight), or [ x ] [Enter] , where [ x ] is the page
you want to set 1-to-1.
Bump Keys
You can enable or disable the bump keys (also known as bump buttons) for the channel/
submaster faders. You might want to do this if you or your operator has a tendency to
accidentally lean on or press the bump keys, causing channels or submasters to flash to
full output unexpectedly. Bump keys are enabled by default.
Disable (or enable) the bump keys:
Step 1: On your Emphasis Facepanel or from the virtual facepanel in Emphasis
Visualization, press [Setup] [1] [Enter] to display the Systems Settings menu.
Step 2: Press [1] [Enter] to access the System Settings menu.
Step 3: Press [1][2] [Enter] to choose Bump Keys.
Step 4: Press [0] [Enter] to disable the bump keys, or [1] [Enter] to enable the bump
keys.
Record Lockout
Once your show is programmed, you may want to prevent an operator from making
changes to your recorded cues or submasters. You can disable the [Record] , [Track] and
[Update] functions by enabling the record lockout. The record lockout is disabled by
default.