Eaton EMR-4000, Инструкция по установке, эксплуатации и обслуживанию

Страница: 246 / 960

EMR-4000 IM02602009E
Parameter Description Setting range Default Menu path
Physical Settings Digit 1: Number of bits. Digit 2: E=even parity, O=odd
parity, N=no parity. Digit 3: Number of stop bits. More
information on the parity: It is possible that the last data
bit is followed by a parity bit which is used for recognition
of communication errors. The parity bit ensures that with
even parity ("EVEN") always an even number of bits with
valence "1" or with odd parity ("ODD") an odd number of
"1" valence bits are transmitted. But it is also possible to
transmit no parity bits (here the setting is "Parity =
None"). More information on the stop-bits: The end of a
data byte is terminated by the stop-bits. 8E1,
8O1,
8N1,
8N2
8E1 [Device Para
/Modbus
/Communication]
t-call If there is no request message sent from Communication
to the device after expiry of this time, the device
concludes a communication failure within the
Communication system. 1 - 3600s 10s [Device Para
/Modbus
/Communication]
Comm CmdBlo Activating (allowing)/ Deactivating (disallowing) the
blocking of the Communication Commands Inactive,
Active
Inactive [Device Para
/Modbus
/Communication]
Disable Latching Disable Latching: If this parameter is active (true), none
of the Modbus states will be latched. That means that trip
signals wont be latched by Modbus. Inactive,
Active
Inactive [Device Para
/Modbus
/Communication]
AllowGap If this parameter is active (True), the User can request a
set of modbus register without getting an exception,
because of invalid address in the requested array. The
invalid addresses have a special value 0xFAFA, but the
User is responsible for ignoring invalid addresses.
Attention: This special value can be valid, if address is
valid. Inactive,
Active
Active [Device Para
/Modbus
/Communication]
Optical rest position Optical rest position Light off,
Light on
Light on [Device Para
/Modbus
/Communication]
Config Bin Inp1 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device. 1..n, Assignment
List SSV.System Error [Device Para
/Modbus
/Configb Registers
/States]
www.eaton.com 246