DECstation 5000/260, Руководство оператора, Страница: 61 / 215

3.7 Installing Workstation Software
3.7 Installing Workstation Software
The software for your system can be installed by you, or it may be installed at
the factory.
If you are installing the software, follow the instructions in the
Guide to
Installing ULTRIX .
If you have factory-installed software, follow these instructions to start the
software:
1. At the console prompt (>>), type
setenv boot "3/rz2/vmunix -a" and press
Return.
2. Then type boot and press Return.
See the ULTRIX Guide to Starting the Factory-Installed Software System for
further instructions.
Once you have installed the software, you can start it up in subsequent
sessions just by typing
boot
at the console prompt and pressing Return.
You will see some ULTRIX start-up messages, and then the log-in screen
appears. This is where you type your user name and your password, if you
have one. You receive both your user name and password from the system
manager when you first begin using your workstation.
Note
You must be running ULTRIX and UWS V4.3A or later. Earlier
versions of ULTRIX did not support the DECstation 5000 Model 260.
3–10 Starting and Testing