DECstation 5000/260, Руководство оператора, Страница: 31 / 215

The Main Components and How to Install Them
1.2 The Monitor
2. Attach the threaded cable connector to the video connector in the system
unit or TCE box.
Figure 1–14 Connecting a monochrome video cable assembly to the system
unit
2
2
1
0
PMAG-A
WS3PO071
System unit
video connector in
TURBOchannel
option slot 0
3
Press the threaded
cable connector onto
the video connector
and turn the threaded
connector to your right
as far as it will go.
1.2.4 Connecting More Than One Monitor to a Workstation
You can connect an additional monitor for each TURBOchannel graphics option
module you may have installed. However, all graphics option modules must be
the same type and your workstation must be running an advanced installation
of ULTRIX version 4.2 or higher. No matter how many monitors you attach to
your workstation, you can use only one keyboard and mouse or other pointing
device. The monitor that displays the console text is the monitor connected
to the lowest numbered TURBOchannel slot, regardless of the number of
monitors on the system.
To connect additional monitors to your workstation, follow the instructions
for connecting a single monitor. To install graphics option modules inside
the system unit, follow the instructions in your TURBOchannel user
documentation.
The Main Components and How to Install Them 1–17