DECstation 5000/260, Руководство оператора, Страница: 161 / 215

10.6 Console Commands
Table 10–2 Module Codes
Module Code Description
CX---d=8 or 24
True color frame buffer, where d=8 indicates color
or gray scale, and d=24 indicates ‘‘true’’ color (any
color the eye can see). This module can be installed
in any TURBOchannel option slot.
CXT 8 plane
Smart frame buffer. This module can be installed
in any TURBOchannel option slot.
DA: PXG+---D=8 or 24
Low 3D graphics accelerator, where D=8 indicates
color or gray scale, and D=24 indicates ‘‘true’’
color (any color the eye can see). This module
occupies two adjacent TURBOchannel option slots,
but is connected to the system through the lower-
numbered slot.
EA: PXG+---D=8 or 24
Mid 3D graphics accelerator, where D=8 indicates
color or gray scale, and D=24 indicates ‘‘true’’
color (any color the eye can see). This module
occupies two adjacent TURBOchannel option slots,
but is connected to the system through the lower-
numbered slot.
.
enet:
Ethernet controller. A ThickWire Ethernet
controller is built into the base system. Other
Ethernet controllers may be installed in the
TURBOchannel option slots. The 12-character
alphanumeric reference after
enet:
is a unique
Ethernet station address that identifies the
controller for the network software.
FA: P
High 3D graphics accelerator. This module occupies
three adjacent TURBOchannel option slots, but
is connected to the system through the lower-
numbered slot.
.
MB
Memory module. The number indicates the
megabytes of memory installed in base slot 3.
MX---D=1
Monochrome frame buffer, where D=1 indicates
black and white. This module can be installed in
any TURBOchannel option slot.
(continued on next page)
10–14 Using the Console Commands