DECstation 5000/260, Руководство оператора, Страница: 23 / 215

The Main Components and How to Install Them
1.2 The Monitor
1.2 The Monitor
Your workstation comes with a color or a monochrome monitor for use with
your worksystem software and as a system console. You can also connect
a terminal to your workstation for use as an alternate system console (see
Chapter 10 for details).
The monitors shown in the illustrations for this guide are examples of several
different monitors you can order for your workstation. The exact position of
the on/off switch, connectors, and controls will vary depending on the monitor
you order.
The video connector to which the monitor attaches can be located in any one
of the TURBOchannel option slots on the system unit, or in a TURBOchannel
extender (TCE) unit, connected to the system unit. The examples used here
assume that the video connector is in TURBOchannel option slot 0.
1.2.1 Turning Your Monitor On and Off
Before connecting the monitor, make sure that the monitor and system unit
power switches are in the off position, and that neither unit is plugged into a
power source.
Caution
Do not connect or disconnect your monitor while power is turned on.
This can damage the monitor.
Figure 1–6 shows how to turn the monitor power off with three different types
of switches.
The Main Components and How to Install Them 1–9