DECstation 5000/260, Руководство оператора, Страница: 183 / 215

11.3 Is It Connected Properly?
Table 11–2 (Cont.) Solutions to Common Problems
Problem Solution
You cannot install
worksystem software
from an external storage
device.
If you have only one external storage device,
1.
Make sure that the device is turned on and the power outlet it is
plugged into has power.
2.
Use the cnfg command to determine whether the workstation lists
the device.
3.
If the device is missing from the display, turn off the device and
the system unit and check the following:
• Make sure that the SCSI expansion cable is correctly
connected to the device and to the system unit.
• Make sure that a terminator is correctly attached to the
second SCSI connector on the device (unless the device is a
TCE, which has an internal SCSI terminator).
• Check the SCSI ID switch settings or SCSI ID display
window on the device to make sure that the SCSI ID is
unique and within the range 0 to 6. If not, change the SCSI
ID accordingly. See Chapter 5.
4.
Turn on the device and the system unit.
If the problem persists, refer to the manual that came with the
device and to the installation guide for your workstation software.
(continued on next page)
11–12 Troubleshooting