DECstation 5000/260, Руководство оператора, Страница: 164 / 215

10.6 Console Commands
Table 10–3 shows the device codes and device descriptors of SCSI devices, as
indicated in items 4 and 6 of the cnfg display.
Table 10–3 SCSI Device Codes and Descriptors
Device Code Device Descriptor Type of Drive
rx DIR Diskette
rz CD–ROM Optical compact disc
rz DIR Hard disk
tz SEQ Tape
10.6.5 d
>>d [OPTIONS]
RANGE value
The d, or deposit, command writes values to memory. Values can be stored as
words, halfwords, or bytes. The default option is word. The command writes
the specified value through the range of specified addresses. No intervening
blanks are allowed in an address range.
Options are:
-w Word (default)
-h Halfword
-b
Byte
-S count Repeat deposit count times
The -S option causes a value to be stored repeatedly in memory. The value is
stored count times at each address in the address range.
Ranges can be:
address Single address
address:address Starting and ending address
address#count Starting address and the number of addresses
range,range Multiple address ranges separated by commas. Note that no space
follows the comma in an address range.
Using the Console Commands 10–17