DECstation 5000/260, Руководство оператора, Страница: 58 / 215

3.3 Testing Your Workstation
3.3.2 To Run the Full Self-Test
1. If your workstation is running the ULTRIX worksystem software, type
shutdown -h now at the ULTRIX prompt and press Return to halt the
software.
2. At the console prompt (
>>
), type test and press Return.
• As the system performs the subtests that make up the self-test, it briefly
displays the name of each subtest on the screen. The tests can take 15
minutes or more to run.
At the end of the self-test, messages scroll across the screen explaining any
errors that occurred during any of the subtests. Then the console displays
the console prompt (
>>
).
• To redisplay the error messages, type
erl
at the console prompt (
>>
) and
press Return.
3.3.3 If a Self-Test Fails
At the end of the system self-test, error messages that have been generated
scroll across the screen. Use the error log command (erl) to redisplay these
messages and to look for others.
If you see any error messages, or if you see a message that begins with
?TFL:
,
turn to Chapter 11 for an explanation of the message and troubleshooting
instructions.
3.4 Checking the Configuration Display
The configuration test tells you which option modules are in your system unit.
It identifies each module in your system unit by slot number and a special
option module code.
Use the cnfg command to check the workstation configuration (see Chapter 10).
Check to be sure that all the modules ordered for your workstation are listed in
the display on your screen. The modules you ordered are listed on the packing
list for your shipment.
Starting and Testing 3–7