DECstation 5000/260, Руководство оператора, Страница: 182 / 215

11.3 Is It Connected Properly?
Table 11–2 (Cont.) Solutions to Common Problems
Problem Solution
No cursor appears on
the screen.
1.
Check the Hold Screen indicator light on the keyboard. If the
light glows green and ULTRIX is running, press the Hold Screen
key. If you are at the console, press Ctrl/Q.
2.
Move the mouse around on your desktop, or move the puck or
stylus around on your tablet, to see if you accidentally moved the
cursor off the screen.
3.
Shut down your worksystem software and turn off the system
unit. To run shutdown, log into the system over the net and run
shutdown remotely. Otherwise, halt the system.
4.
Make sure that the mouse cable is correctly connected to the
keyboard-mouse connector blocks, and the keyboard-mouse cable
is correctly connected to the system unit.
5.
Turn on the system unit.
6.
If the problem persists, install another mouse or tablet.
The cursor on the
screen fails to follow
the movement of your
pointing device (mouse,
puck, or stylus).
1.
Shut down your worksystem software and turn off the system
unit.
2.
Make sure that the cable for the device is connected securely to
the keyboard-mouse connector block and to the device itself.
3.
Turn on the system unit.
4.
If the problem persists, install another pointing device.
(continued on next page)
Troubleshooting 11–11