DECstation 5000/260, Руководство оператора, Страница: 124 / 215

9.1 Installing and Removing Memory
9.1 Installing and Removing Memory
DECstation 5000 Model 260 workstations come with at least 16 megabytes of
memory. You can add more memory by installing additional memory modules
in the memory module slots inside the system unit. Your workstation has 15
memory slots. The first 14 slots (slots 0 to 13) can hold either all 8-megabyte
or all 32-megabyte single in-line memory modules (SIMMs). The last slot (slot
14) can hold either another SIMM of the same type or an NVRAM module.
• With 8-megabyte memory modules, you can install up to 120 megabytes of
memory.
• With 32-megabyte memory modules, you can install up to 480 megabytes of
memory.
When adding memory modules, follow these rules:
• Fill the memory slots in order, starting with slot 0.
• Do not leave an empty slot between two filled slots.
• Use only one type of memory module in your workstation: either the
MS02L-AB or the MS02-CA.
Each MS02L-AB module contains 8 megabytes of memory.
Each MS02-CA module contains 32 megabytes of memory.
The cnfg command shows how much memory is installed in your workstation.
Chapter 10 explains how to use the command.
9–2 Installing Internal Option Modules