DECstation 5000/260, Руководство оператора, Страница: 53 / 215

3.1 Turning On Your Workstation
3.1 Turning On Your Workstation
Before turning on your workstation for the first time,
• Make sure that the system unit power cord is plugged into a wall outlet or
power strip.
• Make sure that the monitor and any external devices are plugged into a
power source.
• If any components of your workstation are plugged into a power strip,
make sure that the power strip is plugged into a power outlet.
• If you intend to control power to your workstation by turning the power
strip on and off, make sure that all power switches on the workstation
components are set to the on position.
If all workstation components are plugged into a power strip, first turn on the
power strip, then your workstation. If some of your workstation components
are plugged into different outlets, turn on your workstation in the following
order:
1. Turn on any external devices. Most devices have rocker switches. Some
have push switches.
2. If necessary, turn on the monitor.
• If the monitor gets its power through the system unit, and if you have
set the monitor power switch to the on position, the monitor will go on
when you turn on the system unit.
• If the monitor is plugged into a wall outlet, or if the monitor power
switch is in the off position, turn it on now. (For instructions, refer to
the documentation that came with the monitor or see Section 1.2.1.)
When the monitor turns on, a green indicator light glows on the front of
the monitor. The monitor must run for 10 to 15 seconds before it is warmed
up enough for the display to be visible.
3. Turn on the system unit by pressing the | on the On/Off switch on the
back of the system unit. See Figure 3–1.
3–2 Starting and Testing