DECstation 5000/260, Руководство оператора, Страница: 180 / 215

11.3 Is It Connected Properly?
Table 11–2 (Cont.) Solutions to Common Problems
Problem Solution
Color is distorted or
unclear.
1.
Move magnetic paper clip holders and electric pencil sharpeners
or other electromechanical devices away from the monitor.
2.
If your monitor has a degauss button, press it for 5 seconds. If the
monitor has no degauss button, turn the monitor off and then on
again.
3.
See the manuals for your monitor for further troubleshooting
instructions.
Red or blue is missing
from the display on your
color monitor.
1.
Shut down your worksystem software and turn off the system
unit and monitor.
2.
Make sure that the video cable connectors are attached to the
monitor correctly. (See Chapter 1.)
3.
Turn on the system unit and monitor.
The DIGITAL logo is
red instead of blue on
the login screen on your
color monitor.
1.
Shut down your worksystem software and turn off the system
unit and monitor.
2.
Remove the video cable connector from the video connector on the
system unit.
3.
Unplug the cable connector. Holding the cable connector so that
the widest part of the connector is on top, reattach the cable
connector to the system unit.
4.
Turn on the system unit and monitor.
(continued on next page)
Troubleshooting 11–9