DECstation 5000/260, Руководство оператора, Страница: 166 / 215

10.6 Console Commands
10.6.8 go
>>go [address]
The go command transfers control of the workstation to the specified address.
If you do not specify an address, go uses the execution address returned by the
last boot -n command. If the boot -n command has not been executed and no
address is specified, the system ignores the go command.
10.6.9 init
>>init [#] [argument...]
The init command initializes module hardware. If you specify a slot number
(
#
), the command initializes the modules in that slot only.
Arguments are specific to each module.
10.6.10 ls
>>ls [#]
The ls (list) command displays a list of the files in a module ROM. If you do
not specify a slot number ( # ), the command lists the files for all modules.
10.6.11 passwd
>>passwd [OPTIONS]
The passwd command enters, sets, or clears your console password. Options
are:
-s
Set a new console password
-c Clear the console password
The console password keeps unauthorized people from using the console
commands on your workstation. You do not need to use the password if
security is not an issue in your workplace.
When you first set up your workstation, you do not need a console password.
The only way that a console password can be required is if you choose to start
using one.
1
1
The console password is not the same as the passwords required by your worksystem
software or networks. The console password protects your workstation hardware by
controlling access to the console commands.
Using the Console Commands 10–19