DECstation 5000/260, Руководство оператора, Страница: 125 / 215

9.1 Installing and Removing Memory
9.1.1 To Install Memory Modules
To install memory modules, you need a medium Phillips screwdriver.
1. Follow the instructions that came with your worksystem software to shut
down the software.
2. Turn off the system unit by pressing the O on the on/off switch on the back
of the unit. Then unplug the system unit power cord.
Caution
Allow the unit to cool down several minutes before touching any
internal parts, as the parts could be hot.
3. Remove the cover from the system unit (see Section 8.3.1).
4. Attach one end of the antistatic wrist strap to your wrist and attach
the other end to the metal frame that encloses the system unit (see
Section 8.4).
5. Locate the metal bracket that locks the memory modules in place (see
Figure 9–1). Loosen the two screws on the bracket until the bracket can be
pulled away from the system unit.
Installing Internal Option Modules 9–3