DECstation 5000/260, Руководство оператора, Страница: 150 / 215

10.2 Using Console Mode
10.2.1 To Enter Console Mode
To enter console mode, do one of the following:
• If you are using ULTRIX worksystem software, type
shutdown -h now at
the ULTRIX prompt and press Return.
• Press the halt button on the back of the system unit.
• Turn off the power to the system unit and turn it back on again.
Caution
Be sure that your workstation and any worksystem software are shut
down before you turn off the power or press the halt button. Otherwise,
data may be lost or corrupted.
10.2.2 Console Prompts
When you use console mode, the workstation displays one of these two prompts
on the screen of the system console:
>>
or
R>
.
• The
>>
prompt means that the workstation is in privileged mode. You can
execute all console commands at the console prompt.
• The
R>
prompt means that the workstation is in restricted mode because
someone has set up a password requirement to restrict access to the console
prompt. At the restricted console prompt, you can use only the boot and
passwd console commands until you enter the correct password.
To change the console prompt to (
>>
), type passwd and press Return. Then
enter the console password and press Return again. If you do not know the
password, contact your system manager or a Digital service representative.
Using the Console Commands 10–3