DECstation 5000/260, Руководство оператора, Страница: 55 / 215

3.1 Turning On Your Workstation
4. If you are starting your workstation for the first time, you will be prompted
to select a keyboard language (see Section 3.2).
5. The screen displays the console prompt (
>>
) or the restricted console
prompt (
R>
) when the system is ready to accept user commands.
• At the console prompt (
>>
), you can execute all console commands.
• At the restricted console prompt, you can use only the boot and passwd
console commands until you enter the correct password, because
someone has set up a password requirement to restrict access to the
system.
• To enter your password, type
passwd
and press Return. Then enter
the console password at the
pwd
prompt and press Return again. If you
do not know the password, contact your system manager or a Digital
service representative.
If anything other than the console prompt (
>>
), or restricted prompt (
R>
)
appears, turn to Chapter 11 for troubleshooting instructions.
6. At the console prompt, type erl and press Return to display a complete list
of any error messages that scrolled across the screen during the self-test.
If you see any error messages, or if you see a message that begins with
?TFL:
, turn to Chapter 11 for troubleshooting instructions. After correcting
the error, turn the system unit off and then turn it back on again.
If your system unit fails to turn on, turn it off and check to ensure that
• Power cords are connected properly, and the power strip, if there is one, is
plugged in and turned on.
• There is power at all power outlets.
• All power switches are set to the on position.
If the system unit still fails to work, turn to Chapter 11 for troubleshooting
instructions.
3–4 Starting and Testing