CTI 2500-C100 Скачать руководство пользователя страница 77

Страница: 77 / 113

CTI 2500 Installation and Operation Guide V2.8

10.3 SD Card Method

Using the SD card to update the controller firmware (requires firmware version 5.0 or above).

10.3.1 Firmware Update Planning (SD Card Method)

In order to update the controller firmware using the SD card method, you will need:

•

A standard SD Card

SD or SDHC Cards can be used.

•

A copy of the firmware update file

The firmware update file can be obtained from the CTI Web site
(

http://www.controltechnology.com/downloads/

) and saved on your PC.

•

A PC SD card adapter for reading and writing the SD card

A SD card adapter that plugs into a USB slot typically can be purchased for a nominal price.

•

A base and power supply compatible with the CTI 2500 processor

The controller must be installed in the base and powered during the firmware upgrade
process.

•

The CTI 2500 controller to be updated

10.3.2 Firmware Update Procedure (SD Card Method))

1. If the SD card does not contain the desired firmware update file (.plc), copy the file to the

root directory of the SD card.

NOTE:

The SD card must contain one and ONLY one firmware update file. Firmware update files have a suffix of

.plc. This file must be located in the root directory. The file loader application will not find firmware update

files located in other folders.

If the root directory of the SD card contains more than one firmware update file, the update process will

not proceed. If you have more than one firmware update file on the SD card, you must delete the ones

you do not wish to use or locate them in a folder other than the root.

2. If the controller is installed in a base, disconnect power from the base and remove the

controller from the base.

3. Set the firmware update switch to the Firmware Update position (see Section 2.3).

4. Install the unit into the base and apply power. The controller should display U01 on the

multi-segment display, indicating it is waiting for you to transfer the firmware update file
to the controller.

NOTE:

If the SD card is already inserted when power is first applied, the firmware update process will not

proceed. You must remove the SD card and re-insert it to signal the procedure to continue.

Содержание 2500-C100


















































































































Результаты поиска

Содержание 2500-C100

Отзывы:

Бренды по названию

Популярные бренды

CTI 2500-C100, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 2500-C100

Отзывы:

Бренды по названию

Популярные бренды