CTI 2500-C100, Инструкция по установке и эксплуатации

Страница: 26 / 113

CTI 2500 Installation and Operation Guide V2.8 26
2.4 Setting the User Jumpers or Auxiliary Switches
2500 Series Classic Controllers
Similar in function to the user
switches, user jumpers allow you to
modify the operation of the
controller. User Jumpers are
labeled A – F. Jumpers are used
instead of a switches where the
modified behavior is not commonly
used or to prevent the user from
inadvertently selecting the modified
behavior.
The user jumpers are located next
to the user switches (labeled as J20). A jumper is
O
PEN
when the jumper is not installed or is
located in the right hand position. A jumper is C
LOSED
when the jumper is in the left hand
position. See the illustration below.
2500 Series Compact Controllers
CTI 2500 Series Compact Controller use a set of Auxiliary
Switches, located next to the User switches, instead of
jumpers. The switches are numbered 1 – 6. The
O
N
position is equivalent to the C
LOSED
jumper position.
Open
Closed Open