CTI 2500-C100, Инструкция по установке и эксплуатации

Страница: 105 / 113

CTI 2500 Installation and Operation Guide V2.8 105
APPENDIX E. – BATTERY REPLACEMENT
The 2500 Series controller uses a non-rechargeable lithium battery to maintain user
programs and related data when AC power is removed. The battery and the battery cover
are shipped in plastic bags contained in the controller shipping box.
Remove these items from the bag. Insert the battery into the battery holder with the button
end (+) facing outward.
Align the battery cover tabs with the slots in the holder. Press the
cover in until it is flush with the holder and rotate it 90º in a clockwise direction. You can
insert a coin or a screwdriver into the slot on the cover to aid in rotating the cover.
Batteries should be stored in the original shipping container in a cool well-ventilated area.
Dispose of used batteries according the instructions of its manufacturer and in compliance
with all federal, state, and local regulations.
WARNING
Do not attempt to charge the lithium battery.
Charging a lithium battery can cause the battery to explode, resulting in serious injury or
death and/or damage to equipment. Replace the battery as shown above.
Lithium batteries contain flammable material. Do not puncture or crush the battery case, since
this can release the material and electrolyte. Exposure to electrolyte can cause eye and/or
throat irritation. If the electrolyte comes into contact with your skin or eyes, flush thoroughly
with water.
Do not place batteries on a metal surface, as this could cause a short circuit.
If a lithium battery short-circuits, disconnect it immediately and move it to a well-ventilated
area. Wear safety glasses and other protective gear when handling a defective battery.
Do not use lithium batteries in a completely sealed container. There must be a means of
relieving pressure if the battery is exposed to high temperature or abuse.
Replacement batteries may be obtained from sources other than CTI. See Appendix F for
battery specifications. Batteries of the correct type that do not meet the low current
specification will have a shorter continuous use life.