F-2
Processor Board, I/O Board, and Standard Peripheral Board
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Writer: Sam Ogden Project: Compaq ProLiant 6000 Setup and Installation Guide Comments: 312237-003 (February 1999)
File Name: M-APPF.DOC Last Saved On: 2/12/99 10:36 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Table F-1
Processor Board Components
Item
Component
Item
Component
1
Removable Media Power
Connector
e
Processor Socket 3
2
Removable Media Power
Connector
r
Processor 3 Bus/Core Ratio Switch
3
Serial A Connector
t
Processor Socket 2
4
Serial B Connector
y
Processor 2 Bus/Core Ratio Switch
5
Internal Fan Connector
u
Processor Socket 1
6
Hot Plug External Fan Connector
i
Processor 1 Bus/Core Ratio Switch
7
Processor Power Module Socket 1
o
Power Connector (5V and 12V)
8
Processor Power Module Socket 2
p
Interlock/Air Sensor Connector
9
Processor Power Module Socket 3
a
Memory Expansion Board (Slot 22)
-
Processor Power Module Socket 4
s
Memory Expansion Board (Slot 21)
q
Processor Socket 4
d
Power Connector (3V)
w
Processor 4 Bus/Core Ratio Switch
Table F-2
Switch Configuration 1 - Switch Configuration 4
Bus/Core Ratio Switch Setting
Bus/Core Ratio
1
2
3
4
400-MHz Models
ON
ON
ON
OFF
450-MHz models
OFF
ON
ON
OFF
500-MHz models
ON
ON
OFF
OFF
550-MHz Models
OFF
ON
OF
OFF
NOTE:
Compaq makes no representation or warranty that processors that operate at any of the
speeds shown will be available at any time.
