CAE Air1 Скачать руководство пользователя страница 26

Страница: 26 / 158

Safety

ÉQUIPMENT MÉDICAL

Concernant le choc électrique, l’incendie et les dangers

mécaniques, conforme au Code Modéle SPE-3000.

Cet équipement a été examiné en ce qui concerne la sécurité

contre les chocs électriques et les risques d’incendie. Il n’a pas

été examiné pour d’autres effets physiologiques.

MEDICAL EQUIPMENT

With Respect to Electrical Shock, Fire and Mechanical Hazards

In Accordance to Model Code SPE-3000.

This equipment has been investigated with regards to safety

from electrical shock and fire hazard. It has not been

investigated for other physiological effects.

This device complies with Part 15 of FCC Rules. Operation is

following two conditions:

1. this device may not cause harmful interference, and

2. this device must accept any interference received,

including interference that may cause undesired

Warning Text Labels with Symbols

Содержание Air1































































































































































Результаты поиска

Содержание Air1

Отзывы:

CAE Air1, Руководство пользователя, Страница: 26 / 158

Результаты поиска

Содержание Air1

Отзывы: