CAE Air1 Скачать руководство пользователя страница 124

Страница: 124 / 158

119

Care and Maintenance

See the

Interface Overview

section of this user guide for information on how to change the

passcode.

Settings Screen - Administrator Settings Unlocked

5. Select the

Network

button. If the colour of the Network button is blue, it is ready for software

update or log collection.

Updating the Software

Updating the software will be required periodically. The following equipment will be required:

• Laptop computer intended for ventilator maintenance use.

• Ethernet cable

To update the software from a web browser:

1. After activating the network on the ventilator, connect the laptop via the Ethernet cable

(attach the cable at the back of the ventilator).

2. Power on the laptop.

3. Launch the web browser.

4. From the browser enter the following address:

https://172.20.4.17:58080

Note:

Default static IP of MPIC: 172.20.4.17

5. Select

Go on to the web page.

Содержание Air1































































































































































Результаты поиска

Содержание Air1

Отзывы:

CAE Air1, Руководство пользователя, Страница: 124 / 158

Результаты поиска

Содержание Air1

Отзывы: